Engine Parts & Upgrades

2001 - 2016 GM Duramax 6.6L

Mahle VS50395 Valve Cover Gasket Set is a direct replacement for your 2003-2007 Ford 6.0L Powerstroke.

2003-2007 Ford Powerstroke 6.0L - When replacing the valve cover gasket on your 6.0L Powerstroke, use a genuine Ford/Motorcraft OEM replacement valve cover gasket for 100% piece of mind.

2008-2010 Ford Powerstroke 6.4L - When replacing the left-hand side valve cover gasket on your 6.4L Powerstroke, use a genuine Ford/Motorcraft OEM replacement valve cover gasket for 100% piece of mind.

2008-2010 Ford Powerstroke 6.4L - When replacing the right-hand side valve cover gasket on your 6.4L Powerstroke, use a genuine Ford/Motorcraft OEM replacement valve cover gasket for 100% piece of mind.

2003-2004 Ford 6.0L Powerstroke Injection Control Pressure Sensor 3C3Z-9F838-EA is a genuine OEM Ford replacement for the Injection Control Pressure Sensor in your 2003-2004 6.0L Powerstroke, it is manufactured to meet or exceed the specifications of the original sensor and is thoroughly calibrated to ensure accurate readings. This ICP sensor is located under the turbo

2004-2007 Ford 6.0L Powerstroke Injection Control Pressure Sensor 4C3Z-9F838-A is a genuine OEM Ford replacement for the Injection Control Pressure Sensor in your 2004-2007 6.0L Powerstroke, it is manufactured to meet or exceed the specifications of the original sensor and is thoroughly calibrated to ensure accurate readings. This ICP sensor is located under the turbo

1999-2003 Ford 7.3L Powerstroke - If you need to replace your ICP Sensor, then replace it with the parts that were designed for your vehicle. This Motorcraft ICP sensor is a genuine factory OEM replacement.

1999-2007 Ford 7.3L/6.0L Powerstroke Injection Control Pressure & Exhaust Back Pressure Sensor Harness

2010-2019 Dodge 6.7L Cummins - PacPro’s oil filtration relocation kit provides easy access & serviceability to the engine’s oil filter. A remote oil filter is most beneficial for those who have twin turbos, as the installation of the second turbo denies access to the stock filter location.

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running 1994-2007 Dodge 5.9L Ram Cummins with the PowerMAX™ Diesel Stage 2 Boost Cooler system from Snow Performance! A 7 Gallon reservoir is included with this kit.

XDP's 3/8" street performance pushrods eliminate the weak link in the valvetrain of your 2001-2016 GMC/Chevy 6.6L Duramax diesel. The factory pushrods cannot stand up to the stress of a modified engine leading to valvetrain damage and power loss.

XDP's 3/8" street performance pushrods eliminate the weak link in the valvetrain of your 2017-2020 GMC/Chevy 6.6L Duramax diesel. The factory pushrods cannot stand up to the stress of a modified engine leading to valvetrain damage and power loss.

2001-2016 GMC Chevy 6.6L Duramax - Not just a dress-up part, XDP’s Billet Oil Cap features a durable aluminum construction, and is a direct replacement for the factory cap that becomes damaged and brittle with age.

Upgrade your fuel filter cap with XDP’s Billet Fuel Filter Cap. A direct replacement for your 2003-2007 Ford Powerstroke 6.0L factory cap that becomes damaged and brittle with age.

2003-2010 Ford Powerstroke 6.0L / 6.4L - Not just a dress-up part, XDP’s Oil Filter Cap features a durable aluminum construction, and is a direct replacement for the factory cap that becomes damaged and brittle with age.

These ARP head studs for your 1998.5-2021 Dodge Cummins 5.9/6.7L are rated at 220,000 psi tensile strength, and provide the clamping force required to keep cylinder heads from lifting due to higher combustion pressures. A must if you are replacing head gaskets.

The Banks Power Grid Heater Delete removes the factory heater grid in your 2007.5-2012 Dodge 6.7L Cummins for increased throttle response, and quicker spool up.

Banks Power Monster-Ram Intake System with High-Flow Heater & Billet Intake is designed to flow air more efficiently, optimum performance and providing greater boost without the drawback of raising turbine back-pressure for your 2007.5-2012 Dodge 6.7L Cummins trucks.

Banks Power Monster-Ram Intake System with High-Flow Heater & Billet Intake is designed to flow air more efficiently, optimum performance and providing greater boost without the drawback of raising turbine back-pressure for your 2007.5-2012 Dodge 6.7L Cummins trucks.

Banks Power Monster-Ram Intake System with High-Flow Heater & Billet Intake is designed to flow air more efficiently, optimum performance and providing greater boost without the drawback of raising turbine back-pressure for your 2007.5-2012 Dodge 6.7L Cummins trucks.

A replacement set of exhaust manifold gaskets for 2007.5-2018 Dodge Cummins 6.7L diesel trucks. Includes EGR port, exhaust port and turbo mount gaskets.

A replacement set of exhaust manifold gaskets for 2013-2013 Dodge 6.7L Cummins cab & chassis trucks. Includes EGR port, exhaust port and turbo mount gaskets.

Common to the Dodge 5.9L 12-valve engines, the dowel pin located behind timing cover can work its way loose and drop down into the timing gears causing extensive damage. This kit gives everything needed to replace the pin with a more permanent solution before it leaves your truck down. Fits 1998 - 2002 Dodge 5.9L Cummins 24V trucks.

Mahle Intake Heater Grid Gasket is designed to replace leaky sealing, rough idling and stumbling on your 1989-2007 Dodge 5.9L Cummins truck.

The Mahle VS50743 Rocker Carrier Gasket Set is a high-quality replacement for the ripped or leaking rocker carrier gasket in your Ford 6.0L Powerstroke.

2008 - 2010 Ford 6.4L Powerstroke - This is a replacement DPF (Diesel Particulate Filter) Temperature Sensor

Genuine OEM rocker carrier gasket for your 6.0L Ford truck.

Keeping the oil clean in your 2003-2007 Ford 6.0L Powerstroke is crucial. The Sinister oil filter kit adds the best oil filter available on the market with parts to filter better than any other filter on the market.

Lower EGTs 100-300 degrees and increase HP by 65+ with a cleaner, cooler running 2007.5-2018 Dodge 6.7L Ram Cummins with the PowerMAX™ Diesel Stage 2 Boost Cooler system from Snow Performance! A 7 Gallon reservoir is included with this kit.

XDP's 11/32" street performance pushrods eliminate the weak link in the valvetrain of your 2003-2010 Ford 6.0L/6.4L Powerstroke diesel. The factory pushrods cannot stand up to the stress of a modified engine leading to valvetrain damage and power loss.

The Best Solution for your 2003-2006 6.0L Ford Powerstroke diesel. This kit includes everything needed to fix all the major problems with the 6.0L Powerstroke engines with 18mm dowels. No more stretched bolts, blown head gaskets, white smoke from the EGR cooler, or defective EGR valves.

2008 - 2010 Ford 6.4L Powerstroke

2003 - 2007 Ford 6.0L Powerstroke

Eliminate the leaks associated with the factory rear frost plug before they happen with BD's Killer Frost Plug Plate kit for your 1989-2002 Dodge Cummins 5.9L diesel.

A replacement diesel fuel cap for the fuel fill-up tube on your 2013-2018 Dodge Cummins 6.7L and 2014-2018 Dodge Ram 1500 3.0L EcoDiesel.

Mahle Intake Manifold Installation Kit - Ford 6.0L Powerstroke 2003-2007

2008 - 2010 Ford 6.4L Powerstroke - This is a replacement EGR (Exhaust Gas Recirculation) Temperature Sensor for the right-hand side up-pipe

Keeping the oil clean in your 2008-2010 Ford 6.4L Powerstroke is crucial. The Sinister oil filter kit adds the best oil filter available on the market with parts to filter better than any other filter on the market.

XDP's 3/8" street performance pushrods eliminate the weak link in the valvetrain of your 2011-2019 Ford 6.7L Powerstroke diesel. The factory pushrods cannot stand up to the stress of a modified engine leading to valvetrain damage and power loss.