8675-01 Synergy Adjustable Front Track Bar - Ford 6.0L/6.4L/6.7L Powerstroke - 2005-2023

Overview

The Synergy 8675-01 Adjustable Front Track Bar that will correct the front end of your 2005-2023 Ford F-250/450/550. This adjustable track bar will help center the axles when leveling the truck or running a suspension lift. This track bar significantly increases lateral stiffness over the factory unit and is considerably stronger than stock to hold up to the abuse of large tires and aggressive driving. The length is adjustable when mounted on the truck to make adjustments a breeze. It uses a maintenance-free Synergy Dual Durometer Bushing on the driver's side and a metal-on-metal HD tie rod end on the passenger side. The bar is curved to clear most aftermarket differential covers at full bump.

Benefits

• No modifications required to install
• Compatible with Synergy HD Steering
• Adjustable without removing from vehicle
• No jam nuts that are impossible to keep tight
• Bent to clear most aftermarket differential covers
• Allows centering of front axle when running a suspension lift
• Isolates Noise, Vibration, and Harshness (NVH) increasing ride quality

Features

• Made from high quality 1.50 inch x .250 wall DOM
• Retains factory track bar mounting bolts & hardware
• Features Synergy greaseable metal on metal tie rod end for a stronger connection to the axle
• 100 percent bolt-on components assure an easy, trouble-free installation with the use of basic hand tools
• Suspension components feature an abrasion-resistant powder coat finish for maximum durability and corrosion resistance
• Synergy double adjuster sleeve & pinch bolt assembly allows for adjustment of track bar length without removing the control arm mounting bolt
• Features Synergy Dual Durometer Bushing (DDB) with Teflon bearing surface for a maintenance-free design focusing on performance, flex, longevity, and ride quality (drives side)

Min/Max Length

• Measured in a straight line from the center of the bolt hole to the center of the bolt hole
• Min collapsed length: 36.375"
• Max extended length: 37.75"

Includes

• (1) Synergy Ford Track Bar
• (1) Synergy Ford Tie Rod End
• (1) Synergy Double Adjuster Sleeve
• (1) Synergy Forged End With Dual Durometer Bushing 

Note

• Synergy 4119 High-Performance Grease is recommended.
• 2005+ F-450/550 will also need to run a minimum of 2" of bump stop to avoid possible contact with frame components. 
• 2005-2016 F-250 / F-350 and 2005+ F-450 / F-550 will need to use Synergy part 8675-11 adaptor slug, to convert the early model axle interface to a late model. 
• 2005+ F-450 / F-550 will run the track bar in a different position than the F250 / F350. Please see the instructions.