Chips, Tuners & Displays

Replacement OBD-II junction/control box for any Bully Dog, H&S Mini Maxx or Black Maxx tuners.

Edge Products OBD-II to HDMI Cable

Replacement high-speed data HDMI cable that is connected between the OBD-II control box and the back of the tuner. This cable can be used with any BullyDog, H&S Mini Maxx or Black Maxx tuners.

Do you have two accessories fighting for your OBD-II diagnostic port? If so, use this Plug-n-Play Pass-Through Wiring Harness as a splitter so that you can use both at the same time.

Daystar's NO FLASH PLUGS provide an effective way to preserve the tune on your diesel or other custom tuned ride. Protect your custom tune with Daystar!

Daystar's NO FLASH PLUGS provide an effective way to preserve the tune on your diesel or other custom tuned ride. Protect your custom tune with Daystar!

CSP5 Stands For "Cummins Switch Performance". CSP5 Gives You The Ability To Switch Between 4/5 Calibrations With The Purchase Of SOTF (Shift On The Fly).

The Mirror-Mate allows you to install the Bully Dog GT or WatchDog just below the rear view mirror for easy access and viewing and a clean look. The custom T-Slot adapter is designed to work specifically with the GT or WatchDog.

The Windshield Mount allows you to install the Bully Dog GT or WatchDog anywhere you want in the windshield

2010-2021 Dodge 6.7L / 2016+ Nissan Titan XD 5.0L Cummins - Shift tunes on-the-fly with your EFILive or EZ Lynk tuning with this control switch kit. Tuning device not included.

2008-2022 Ford Powerstroke 6.7 & 3.0L - Shift tunes on-the-fly with your EZ Lynk tuning with this control switch kit. Tuning device not included.

2007.5-2010 GM Duramax 6.6L LMM/LBZ - Shift tunes on-the-fly with your EFILive or EZ Lynk tuning with this DSP5 control switch. Tuning not included.

2011-2022 Ford Powerstroke 6.7 - Shift tunes on-the-fly with your EZ Lynk or SCT tuning with this control switch kit. Tuning device not included.

2015-2019 Ford Powerstroke 6.7 - Shift tunes on-the-fly with your EZ Lynk or SCT tuning with this control switch kit. Tuning device not included.

2011-2014 Ford Powerstroke 6.7 - Shift tunes on-the-fly with your EZ Lynk or SCT tuning with this control switch kit. Tuning device not included.

GM Duramax 6.6L - Shift tunes on-the-fly with your EFILive or EZ Lynk tuning with this DSP5 control switch. Tuning not included.

Used with Bullydog Mirror-Mate Mounting Kits for proper wiring extension

2011-2019 Ford Powerstroke 6.7L - This PCM plug from Shibby Engineering is used if removing the emissions wiring harness during emissions systems modifications.

This custom mounting piece will allow anyone to mount the GT diesel, the GT gas, or the WatchDog into any standard or custom gauge pod mount that is equip with standard gauge hole sizes of 2-1/16in.

The Edge ECM connector repair kit replaces all four sliders in the two ECM wiring harness connectors in your 2017-2022 6.6L Duramax truck.

Access the newest tunes for your vehicle by connecting your computer directly to the OBDll port with this update cable.

The EZ LYNK Titan Cable allows full Diagnostic Function Capability on the Titan XD equipped with the Cummins 5.0L Engine.

EZ LYNK OBDII Diagnostic Cable with 18+ RAM SGM Adapter AutoAgent 3. Designed for your 2018 and up RAM 2500/3500 Trucks.

AutoAgent 3 Legacy Adapter Cable Adapts any AutoAgent 2 Cable to the AutoAgent 3

The EZ Lynk AutoAgent 3 Titan Cable Bundle allows full Diagnostic Function Capability on the Titan XD equipped with the Cummins 5.0L Engine.

SGM (Security Gateway Module)

RaceMe's replacement OBD (on-board diagnostics) cable

BOD Engineering CAN Plug 20 - 2020-2023 6.6L Duramax L5P Diesel Silverado & Sierra 2500HD & 3500

"CAN" Plug 10 - 2017-2019 6.6L Duramax L5P Diesel Silverado & Sierra 2500HD & 3500

CAN Plug 20 - 2020-2022 3.0L Duramax LM2 Diesel Silverado & Sierra 1500HD

BOD Engineering CAN Plug 20 - 2020-2024 6.6L Duramax L5P Diesel Silverado & Sierra 2500HD & 3500

"CAN" Plug 10 - 2017-2019 6.6L Duramax L5P Diesel Silverado & Sierra 2500HD & 3500

The Edge EAS Shift On-The-Fly Accessory gives you the ability to change custom tunes on your insight CS2, CTS2 or CTS3 monitor while riving your 2011-2016 6.6L Duramax.

Diesel Switch by HP Tuners lets you power up from a stock calibration to one of five custom maps with the turn of a switch. Pair with HP Tuners’ Switch on the Fly OS for complete control and performance of your diesel.

Shibby Harness' CCV Harness Plug will will cap up the harness interface for the removed components in your 2011-2021 6.7L Powerstroke Ford

Shibby Harness' Universal DEF Plug will stop dribbling, leakage or debris ingress into the line.

Shibby Harness' Universal Duramax EGR Temp Sensor Harness Plug

Shibby's SOTF CCV Harness Tuning Cap Plug for your 2010-2020 6.7 Cummins diesel.

Shibby's SOTF Tuning Harness Plug for your 2011-2014 6.7 Powerstroke diesel.

Shibby's SOTF Tuning Harness Plug for your 2020-2023 6.7 Powerstroke diesel.